淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Drawing a Model >
   General Drawing Guidelines       


General Drawing Guidelines

There is no strict procedure to follow when creating a geometric model; however, the following steps serve as general guidelines.

1. Select the layer you want to draw upon.

2. Activate the Layout view window by clicking its window frame.

3. Use the Draw menu commands to create one- and two-dimensional objects.

Treat each conductor or material in the structure as a separate object. When drawing metal layers, note that the view is top-down.

4. If necessary, use the commands on the Draw and Layout menus to modify the geometry that you created.

5. Periodically save the geometry.

Repeat this procedure for each metal layer.



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com