Creating Objects from Intersections

淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Modifying Objects >
Creating Objects from Intersections

To create a new object from the intersection of two or more objects, use the Layout > Merge Polygons > Intersection command.

1. Select the objects from which you want to take the intersection.

Warning

If the objects you selected do not overlap, the result is a null object and both objects vanish.

2. On the Layout menu, point to Merge Polygons, and then click Intersection.

The original objects vanish, leaving only the new object that was formed from their intersection.

Union and Intersection operations support using selected objects on multiple layers, and each layer object is operated on separately. However, Subtraction is only allowed if the selected objects are on the same layer. Selected objects may be negative objects.

• If only negative objects are selected, the merge operation is performed the same as with positive objects, but the resulting objects remain negative objects.

• If both negative objects and positive objects are selected:

— Perform the union/intersection/subtraction operation on the positive objects

— Always union the negative objects

— Subtract the negative object result from the positive object result

Note

By default, the original intersecting objects are not preserved for later use. If you want to keep a copy of the objects that intersect the first object selected, do the following:

• Copy the objects, and then paste them back into the design after creating the new object from the intersection.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com