• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Designer File Formats >
   Nexxim Netlist Format >
       Subcircuits >
           Hierarchical Names               

Hierarchical Names

To refer to a local device instance name, local node name, or local port name inside a subcircuit, the netlist uses a hierarchical name. The syntax is:

subcircuit_element[.subcircuit_element ...].name

The subcircuit element is the X-element that instantiates the subcircuit (see Subcircuit Instance Statement). For example, to reference resistor Rleft in the instance of subcircuit LINESEG that was instantiated by subcircuit instance Xtrans1, the netlist would have:

Xtrans1.Rleft

The hierarchical device name can include any number of lower level subcircuit calls, separating them with periods. For example, to reference node n25 in the instance of subcircuit sub3 that was instantiated indirectly by subcircuit instance Xtrans2, the netlist would have:

Xtrans2.Xmid.n25

Subcircuit element Xtrans2 calls subcircuit LINESEG, which in turn uses subcircuit element Xmid to reference subcircuit sub3 containing the desired node.

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com