淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Designer File Formats >
CITIfile Format >
CITIfile Data Arrays

CITIfile Data Arrays

The CITIfile package should contain one data array for each DATA line in the header. The first array is the data whose type and format was specified in the first DATA line, the second array is for the second DATA line, and so on. Each array contains one line of data for each frequency in the VAR_LIST block in the header, described earlier.

Here is a data array for the DATA S[1,1] RI line given earlier:

BEGIN
-8.515589E-001, -2.006537E-001
-9.498286E-001, -1.361623E-001
-9.761472E-001, -9.717214E-002
-9.862472E-001, -7.472031E-002
-9.910952E-001, -6.048325E-002
-9.937765E-001, -5.072857E-002
-9.954099E-001, -4.365178E-002
-9.964769E-001, -3.829255E-002
-9.972115E-001, -3.409734E-002
-9.977385E-001, -3.072603E-002
END

Each Real/Imaginary pair of data points corresponds to one of the ten frequencies in the VAR_LIST given earlier.

Note

Multiple, indexed data arrays are not supported in Designer.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com