淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Dynamic Links and Solver On Demand >
   Dynamic Links >
       Adding a Dynamic Link N-Port from HFSS >
           Renormalize Ports Based on HFSS Data

Renormalize Ports Based on HFSS Data

If there are HFSS designs within your Designer design, you can choose to renormalize the characteristic impedance of the circuit ports to the port impedance of one of the HFSS ports.

To renormalize the characteristic impedance to one of the HFSS ports:

1. Double click on the port you want to renormalize in the schematic, this opens the Port Definition dialog.

2. Select the “one-port data” radio button.

3. A Pull down menu lists the HFSS ports in the current design.

4. Select the desired HFSS design, port, and mode number.

The circuit ports is renormalized to the characteristic impedance of the HFSS port as a function of frequency and design parameters.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com