• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Dynamic Links and Solver On Demand >
   Dynamic Links >
       Capturing or Recapturing Bitmap Symbols for Dynamic Link Models           

Capturing or Recapturing Bitmap Symbols for Dynamic Link Models

The automatically generated symbols for HFSS, Q3D, and 2D extractor models normally include a bitmap image of the model. The image may fail to render under certain circumstances, or may not show the desired view. You can update the bitmap image of the model with the desired view by first opening the model in HFSS, Q3D, or 2D Extractor and then setting up the 2D or 3D view appropriately. With HFSS, Q3D, or 2D Extractor open and showing the desired view, go to the Symbol tab of the model dialog and click on the "Recapture bitmap image" button to update the bitmap image associated with the model.

The symbols for components that have been placed in the schematic editor will not be updated with the new bitmap view, however, new components that are generated by dragging and dropping the model onto the schematic window will show the new bitmap image embedded in the symbol.

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com