仿真微波谐振腔的S参量用CST2006,出现警告
文章来源: 互联网 录入: mweda.com
At least 1 propagating mode at port 2 is not considered in calculation!
1 mode shares the same beta with considered mode(s) -> degeneration
It might be better to increase the number of modes at port 2
--------------------------------------------------------------------------------
*** Warning ***
At least 1 propagating mode at port 1 is not considered in calculation!
1 mode shares the same beta with considered mode(s) -> degeneration
It might be better to increase the number of modes at port 1
下面是我设置的波导端口的参数
Port Mode Type Z-Wave Z-Wave-Sigma Z-Line F-Cutoff
1 1 TE 147 3.74e-014 --- 4.78
----------------------------------------------------------------------------
--------------------------------------------------------------------------------
Port: 2
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
Port Mode Type Z-Wave Z-Wave-Sigma Z-Line F-Cutoff
2 1 TE 147 3.74e-014 --- 4.78
微波EDA (www.mweda.com) 网友回复:
-
网友回复
顶一下!没人看,自己顶一下!没人看,自己顶一下!没人看,自己顶一下!
申明:网友回复良莠不齐,仅供参考。如需专业解答,推荐学习李明洋老师的CST培训视频,或咨询本站专家。
-
CST中文视频教程,资深专家讲解,视频操作演示,从基础讲起,循序渐进,并结合最新工程案例,帮您快速学习掌握CST的设计应用...【详细介绍】
推荐课程
-
7套中文视频教程,2本教材,样样经典
-
国内最权威、经典的ADS培训教程套装
-
最全面的微波射频仿真设计培训合集
-
首套Ansoft Designer中文培训教材
-
矢网,频谱仪,信号源...,样样精通
-
与业界连接紧密的课程,学以致用...
-
业界大牛Les Besser的培训课程...
-
Allegro,PADS,PCB设计,其实很简单..
-
Hyperlynx,SIwave,助你解决SI问题
-
现场讲授,实时交流,工作学习两不误