跪求HFFS仿真中报的错误如何修改,请高人指点
05-08
在最后确认仿真的最后一步 老是报错,提示如下
HFSSDesign1 (DrivenModal)
[warning] Solution Setup 'Setup1': Given the specified frequency and model dimensions, an extremely large mesh will be required to produce an accurate solution. Your model and/or frequency units may be set incorrectly.
HFSSDesign1 (DrivenModal)
[warning] Solution Setup 'Setup1': Given the specified frequency and model dimensions, an extremely large mesh will be required to produce an accurate solution. Your model and/or frequency units may be set incorrectly.
这段说明已经给你提示了啊,是不是你的单位搞错了啊,要不就把模型放上来看看!
小编放个模型上来吧
小编放个模型上来吧
相关文章:
- 请问可以用HFSS来仿真印制板天线么?(05-08)
- HFSS仿真时间(05-08)
- 关于GPS/Bluetooth天线HFSS仿真模型(05-08)
- 如何根据频段确定圆柱(圆锥)螺旋天线的尺寸,在HFSS中仿真(05-08)
- 波导同轴转换的仿真(05-08)
- HFSS仿真天线结果不一样(05-08)
天线设计培训教程推荐