ADS求助
12-12
小弟刚开始学习ADS,仿真一些示例时会遇到下列一些问题,不知道是为什么,请过来人帮助一下..谢谢..很多条,以下只是其中一条.
Error detected by hpeesofsim during netlist flattening.
Could not load tsdfsinks: 找不到指定的程序。. Running the simulation
from the command line may give a more detailed error message. See the
"Building Signal Processing Models From the Command Line" chapter of
the Ptolemy manual for instructions on how to do this.
Error detected by hpeesofsim during netlist flattening.
Could not load tsdfsinks: 找不到指定的程序。. Running the simulation
from the command line may give a more detailed error message. See the
"Building Signal Processing Models From the Command Line" chapter of
the Ptolemy manual for instructions on how to do this.
tsdfsinks缺失，你是进行系统仿真吧，大概是netlist不全，仔细检查一下连接
还有后面让你参考的东西，你可以查一下相应的Help
系统级仿真都无法进行,查相应的文档也没有结果,那些文件里面都有,PATH也没问题,我装的是盗版的,破解方法也就是按照上面写的进行的..真不知道是为什么..
解决了,和quartus的破解冲突..硬盘格了重装就没问题了.
如果是正版，应该不会有冲突吧。。
相关文章：
- 请问：ADS子电路存成build-in symbol时的问题(05-08)
- 问一个ADS模拟的问题！(05-08)
- ADS里面的LUMPED WITH ARTWORK元件库是不是不能用于版图仿真？(05-08)
- ADS2003A问题请教(05-08)
- ADS一问(05-08)
- ADS版图能否存为HFSS文件？(05-08)
射频专业培训教程推荐
