官方淘宝店 易迪拓培训 旧站入口
首页 > 手机设计 > MTK手机设计平台 > MTK综测结果Ripple Range 2 Not tested 对应在CFG哪里可以设置?

MTK综测结果Ripple Range 2 Not tested 对应在CFG哪里可以设置?

05-08

[TX Test Case 46][TX Test Case 46] Band 41 MCS 0 Uplink UARFCN 25930 Bandwidth 2
TX Power 18.209 MAX 21 MIN 17 PASS
EVM
EVM (%rms) 1.806 MAX 10 MIN 0 PASS
Magnitude Error (%) 1.313 MAX 10 MIN 0 PASS
IQ Offset (dB) -47.293 MAX -20 MIN -100 PASS
Frequency Error(ppm) 0.004 MAX 0.1 MIN -0.1 PASS
Phase Error (degree) 0.71 MAX 3 MIN -3 PASS
ACP(ACLR)
Lower Offset EUtra - relative power -48.043 MAX -30 MIN -100 PASS
Upper Offset EUtra - relative power -40.914 MAX -30 MIN -100 PASS
Lower Offset Utra1 - relative power -53.795 MAX -33 MIN -100 PASS
Upper Offset Utra1 - relative power -41.067 MAX -33 MIN -100 PASS
Lower Offset Utra2 - relative power -51.528 MAX -36 MIN -100 PASS
Upper Offset Utra2 - relative power -51.803 MAX -36 MIN -100 PASS
SEM
SEM PASS
Delta foob Offset 1 Offset 2 Offset 3 Offset 4
Lower Peak Power -49.36 -33.772 -47.664 -46.967
Lower Peak Delta -35.86 -25.272 -36.164 -23.467
Upper Peak Power -28.992 -29.977 -45.449 -46.624
Upper Peak Delta -15.492 -21.477 -33.949 -23.124
Ripple Flatness
Ripple Range 1 PASS
Ripple Range 2 Not tested
Ripple Range 1 to 2 Not tested
Ripple Range 2 to 1 Not tested

综测报错,请问什么原因?



Top