请教一个RF 电感测试的问题
pad寄生效应的影响
3x
Using EM simulation to get the equivalent S-parameter file or circuit during the frequency range you are interested.Then put it into the simulation file for your inductor as a subcircuit to deembed it.
你这个是仿真,人家问的是测试吧。。。
是的啊,如何在测试的时候消除pad寄生效应的影响
比如在旁边做两个开路和短路的pad,具体怎样实现呢?
de-embedded
.193
.193
Firstly,the purpose of your measurement is to get accurate model for your inductor or something else?That will decide which way is better.
If you want to get the measurement result of your inductor without pad effect directly,it becomes easier.Design SLOT structure just same as the pads of the inductor.Then calibrate the system with this SLOT.
多谢!
没太看懂意思,能否详细解释一下,
一个slot怎么就可以校正pad?
SLOT means short,load(50Ohm),Open,and Transmission,which is used for RF calibration.
相关文章:
- Re: 请问如何用微带线实现电感电容(05-08)
- 我想获得3公分波导膜片的电感电容数据(05-08)
- 大伙能不能推荐一个电感的仿真软件? (05-08)
- 请教电感方面的问题(05-08)
- 问一下哪里可以买到可调电感电容?(05-08)
- Re: 什么工具可以算一段微带线等效的电感和电容?(05-08)