Model Summary
Model: d:/program files/hfss/hfss_temp_4.pjt/Setup1
Date : 09/16/2005 18:10:27
The Summary of Results
50 errors detected.
Model errors= 0
Contact errors= 0
Proximity errors= 50
A section under the topic titled Meshmaker in the on line help
has the glossary of terms used in this report. It also describes
the analysis and has suggestions about workarounds.
Model Analysis Results
Proximity Analysis Results
NOTE :** Only the first 50 proximity errors will be reported
-----------------------------------------------
Vertex-Face Ref Number:404
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001, -1.016151e-005 ,5.000000e-001]
The triangle:
vertex id = 49
setcurpos [9.794229e-001 ,-1.035898e-001 ,5.000000e-001]
vertex id = 45
setcurpos [8.000000e-001 ,-2.740548e-015, 2.650000e+001]
vertex id = 50
setcurpos [9.794229e-001 ,-1.035898e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:385
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,5.000000e-001]
The triangle:
vertex id = 17
setcurpos [4.000000e-001 ,6.928203e-001 ,2.650000e+001]
vertex id = 13
setcurpos [4.000000e-001 ,6.928203e-001, 5.000000e-001]
vertex id = 18
setcurpos [3.999824e-001 ,6.928102e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:406
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [3.999824e-001, -6.928102e-001 ,5.000000e-001]
The triangle:
vertex id = 51
setcurpos [4.000000e-001 ,-6.928203e-001 ,2.650000e+001]
vertex id = 52
setcurpos [4.000000e-001 ,-6.928203e-001, 5.000000e-001]
vertex id = 53
setcurpos [4.000000e-001 ,-6.928000e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:398
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001, -1.016151e-005 ,5.000000e-001]
The triangle:
vertex id = 45
setcurpos [8.000000e-001 ,-2.740548e-015 ,2.650000e+001]
vertex id = 46
setcurpos [8.000000e-001 ,-3.608225e-016, 5.000000e-001]
vertex id = 47
setcurpos [7.999824e-001 ,1.016151e-005 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:388
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,5.000000e-001]
The triangle:
vertex id = 18
setcurpos [3.999824e-001 ,6.928102e-001 ,2.650000e+001]
vertex id = 13
setcurpos [4.000000e-001 ,6.928203e-001, 5.000000e-001]
vertex id = 19
setcurpos [3.999824e-001 ,6.928102e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:396
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,5.000000e-001]
The triangle:
vertex id = 12
setcurpos [4.000000e-001 ,6.928203e-001 ,0.000000e+000]
vertex id = 13
setcurpos [4.000000e-001 ,6.928203e-001, 5.000000e-001]
vertex id = 31
setcurpos [5.794229e-001 ,7.964102e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:402
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001, -1.016151e-005 ,5.000000e-001]
The triangle:
vertex id = 46
setcurpos [8.000000e-001 ,-3.608225e-016 ,5.000000e-001]
vertex id = 45
setcurpos [8.000000e-001 ,-2.740548e-015, 2.650000e+001]
vertex id = 49
setcurpos [9.794229e-001 ,-1.035898e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:400
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001, -1.016151e-005 ,5.000000e-001]
The triangle:
vertex id = 47
setcurpos [7.999824e-001 ,1.016151e-005 ,2.650000e+001]
vertex id = 46
setcurpos [8.000000e-001 ,-3.608225e-016, 5.000000e-001]
vertex id = 48
setcurpos [7.999824e-001 ,1.016151e-005 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:387
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,2.650000e+001]
The triangle:
vertex id = 18
setcurpos [3.999824e-001 ,6.928102e-001 ,2.650000e+001]
vertex id = 13
setcurpos [4.000000e-001 ,6.928203e-001, 5.000000e-001]
vertex id = 19
setcurpos [3.999824e-001 ,6.928102e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:389
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,2.650000e+001]
The triangle:
vertex id = 18
setcurpos [3.999824e-001 ,6.928102e-001 ,2.650000e+001]
vertex id = 13
setcurpos [4.000000e-001 ,6.928203e-001, 5.000000e-001]
vertex id = 19
setcurpos [3.999824e-001 ,6.928102e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:382
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [3.999824e-001, 6.928102e-001 ,2.650000e+001]
The triangle:
vertex id = 11
setcurpos [4.000000e-001 ,1.400000e+000 ,0.000000e+000]
vertex id = 10
setcurpos [4.000000e-001 ,9.000000e-001, 5.000000e-001]
vertex id = 12
setcurpos [4.000000e-001 ,6.928203e-001 ,0.000000e+000]
----------------------------------------------
Vertex-Face Ref Number:383
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [3.999824e-001, 6.928102e-001 ,2.650000e+001]
The triangle:
vertex id = 12
setcurpos [4.000000e-001 ,6.928203e-001 ,0.000000e+000]
vertex id = 10
setcurpos [4.000000e-001 ,9.000000e-001, 5.000000e-001]
vertex id = 13
setcurpos [4.000000e-001 ,6.928203e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:399
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001, -1.016151e-005 ,2.650000e+001]
The triangle:
vertex id = 47
setcurpos [7.999824e-001 ,1.016151e-005 ,2.650000e+001]
vertex id = 46
setcurpos [8.000000e-001 ,-3.608225e-016, 5.000000e-001]
vertex id = 48
setcurpos [7.999824e-001 ,1.016151e-005 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:407
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [3.999824e-001, -6.928102e-001 ,2.650000e+001]
The triangle:
vertex id = 53
setcurpos [4.000000e-001 ,-6.928000e-001 ,2.650000e+001]
vertex id = 52
setcurpos [4.000000e-001 ,-6.928203e-001, 5.000000e-001]
vertex id = 54
setcurpos [4.000000e-001 ,-6.928000e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:384
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,2.650000e+001]
The triangle:
vertex id = 17
setcurpos [4.000000e-001 ,6.928203e-001 ,2.650000e+001]
vertex id = 13
setcurpos [4.000000e-001 ,6.928203e-001, 5.000000e-001]
vertex id = 18
setcurpos [3.999824e-001 ,6.928102e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:386
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,2.650000e+001]
The triangle:
vertex id = 17
setcurpos [4.000000e-001 ,6.928203e-001 ,2.650000e+001]
vertex id = 13
setcurpos [4.000000e-001 ,6.928203e-001, 5.000000e-001]
vertex id = 18
setcurpos [3.999824e-001 ,6.928102e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:397
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001, -1.016151e-005 ,2.650000e+001]
The triangle:
vertex id = 45
setcurpos [8.000000e-001 ,-2.740548e-015 ,2.650000e+001]
vertex id = 46
setcurpos [8.000000e-001 ,-3.608225e-016, 5.000000e-001]
vertex id = 47
setcurpos [7.999824e-001 ,1.016151e-005 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:405
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [3.999824e-001, -6.928102e-001 ,2.650000e+001]
The triangle:
vertex id = 51
setcurpos [4.000000e-001 ,-6.928203e-001 ,2.650000e+001]
vertex id = 52
setcurpos [4.000000e-001 ,-6.928203e-001, 5.000000e-001]
vertex id = 53
setcurpos [4.000000e-001 ,-6.928000e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:390
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,2.650000e+001]
The triangle:
vertex id = 17
setcurpos [4.000000e-001 ,6.928203e-001 ,2.650000e+001]
vertex id = 20
setcurpos [4.000000e-001 ,6.928203e-001, 3.000000e+001]
vertex id = 21
setcurpos [5.794229e-001 ,7.964102e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:391
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,2.650000e+001]
The triangle:
vertex id = 17
setcurpos [4.000000e-001 ,6.928203e-001 ,2.650000e+001]
vertex id = 20
setcurpos [4.000000e-001 ,6.928203e-001, 3.000000e+001]
vertex id = 21
setcurpos [5.794229e-001 ,7.964102e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:401
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001, -1.016151e-005 ,2.650000e+001]
The triangle:
vertex id = 46
setcurpos [8.000000e-001 ,-3.608225e-016 ,5.000000e-001]
vertex id = 45
setcurpos [8.000000e-001 ,-2.740548e-015, 2.650000e+001]
vertex id = 49
setcurpos [9.794229e-001 ,-1.035898e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:403
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001, -1.016151e-005 ,2.650000e+001]
The triangle:
vertex id = 49
setcurpos [9.794229e-001 ,-1.035898e-001 ,5.000000e-001]
vertex id = 45
setcurpos [8.000000e-001 ,-2.740548e-015, 2.650000e+001]
vertex id = 50
setcurpos [9.794229e-001 ,-1.035898e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:393
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,2.650000e+001]
The triangle:
vertex id = 23
setcurpos [2.311474e+000 ,1.796410e+000 ,2.650000e+001]
vertex id = 20
setcurpos [4.000000e-001 ,6.928203e-001, 3.000000e+001]
vertex id = 24
setcurpos [2.309608e+001 ,1.379641e+001 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:392
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,2.650000e+001]
The triangle:
vertex id = 21
setcurpos [5.794229e-001 ,7.964102e-001 ,2.650000e+001]
vertex id = 20
setcurpos [4.000000e-001 ,6.928203e-001, 3.000000e+001]
vertex id = 22
setcurpos [1.272243e+000 ,1.196410e+000 ,2.650000e+001]
----------------------------------------------
Vertex-Face Ref Number:395
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,2.650000e+001]
The triangle:
vertex id = 12
setcurpos [4.000000e-001 ,6.928203e-001 ,0.000000e+000]
vertex id = 13
setcurpos [4.000000e-001 ,6.928203e-001, 5.000000e-001]
vertex id = 31
setcurpos [5.794229e-001 ,7.964102e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Face Ref Number:394
Vertex ambiguously close to existing triangle
Dist= 1.760026e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001, 6.928000e-001 ,2.650000e+001]
The triangle:
vertex id = 12
setcurpos [4.000000e-001 ,6.928203e-001 ,0.000000e+000]
vertex id = 31
setcurpos [5.794229e-001 ,7.964102e-001, 5.000000e-001]
vertex id = 30
setcurpos [1.272243e+000 ,1.196410e+000 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:381
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001 ,6.928000e-001 ,5.000000e-001]
Existing Vertex id= 19
setcurpos [3.999824e-001 ,6.928102e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:359
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [3.999824e-001 ,6.928102e-001 ,5.000000e-001]
Existing Vertex id= 13
setcurpos [4.000000e-001 ,6.928203e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:365
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-3.999824e-001 ,-6.928102e-001 ,5.000000e-001]
Existing Vertex id= 58
setcurpos [-4.000000e-001 ,-6.928203e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:379
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-4.000000e-001 ,6.928000e-001 ,5.000000e-001]
Existing Vertex id= 151
setcurpos [-4.000000e-001 ,6.928203e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:366
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-7.999824e-001 ,-1.016151e-005 ,5.000000e-001]
Existing Vertex id= 72
setcurpos [-8.000000e-001 ,5.551115e-017 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:377
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-3.999824e-001 ,6.928102e-001 ,5.000000e-001]
Existing Vertex id= 151
setcurpos [-4.000000e-001 ,6.928203e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:373
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-4.000000e-001 ,-6.928000e-001 ,5.000000e-001]
Existing Vertex id= 58
setcurpos [-4.000000e-001 ,-6.928203e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:369
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001 ,-1.016151e-005 ,5.000000e-001]
Existing Vertex id= 48
setcurpos [7.999824e-001 ,1.016151e-005 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:375
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-7.999824e-001 ,1.016151e-005 ,5.000000e-001]
Existing Vertex id= 72
setcurpos [-8.000000e-001 ,5.551115e-017 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:363
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001 ,-6.928000e-001 ,5.000000e-001]
Existing Vertex id= 52
setcurpos [4.000000e-001 ,-6.928203e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:361
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001 ,1.016151e-005 ,5.000000e-001]
Existing Vertex id= 46
setcurpos [8.000000e-001 ,-3.608225e-016 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:371
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [3.999824e-001 ,-6.928102e-001 ,5.000000e-001]
Existing Vertex id= 54
setcurpos [4.000000e-001 ,-6.928000e-001 ,5.000000e-001]
----------------------------------------------
Vertex-Vertex Ref Number:376
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-3.999824e-001 ,6.928102e-001 ,2.650000e+001]
Existing Vertex id= 150
setcurpos [-4.000000e-001 ,6.928203e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:378
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-4.000000e-001 ,6.928000e-001 ,2.650000e+001]
Existing Vertex id= 150
setcurpos [-4.000000e-001 ,6.928203e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:358
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [3.999824e-001 ,6.928102e-001 ,2.650000e+001]
Existing Vertex id= 17
setcurpos [4.000000e-001 ,6.928203e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:380
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001 ,6.928000e-001 ,2.650000e+001]
Existing Vertex id= 18
setcurpos [3.999824e-001 ,6.928102e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:364
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-3.999824e-001 ,-6.928102e-001 ,2.650000e+001]
Existing Vertex id= 57
setcurpos [-4.000000e-001 ,-6.928203e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:367
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-7.999824e-001 ,-1.016151e-005 ,2.650000e+001]
Existing Vertex id= 74
setcurpos [-8.000000e-001 ,5.551115e-017 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:372
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-4.000000e-001 ,-6.928000e-001 ,2.650000e+001]
Existing Vertex id= 57
setcurpos [-4.000000e-001 ,-6.928203e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:374
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [-7.999824e-001 ,1.016151e-005 ,2.650000e+001]
Existing Vertex id= 74
setcurpos [-8.000000e-001 ,5.551115e-017 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:368
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001 ,-1.016151e-005 ,2.650000e+001]
Existing Vertex id= 47
setcurpos [7.999824e-001 ,1.016151e-005 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:370
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [3.999824e-001 ,-6.928102e-001 ,2.650000e+001]
Existing Vertex id= 53
setcurpos [4.000000e-001 ,-6.928000e-001 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:360
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [7.999824e-001 ,1.016151e-005 ,2.650000e+001]
Existing Vertex id= 45
setcurpos [8.000000e-001 ,-2.740548e-015 ,2.650000e+001]
----------------------------------------------
Vertex-Vertex Ref Number:362
Vertex ambiguously close to an existing vertex
Dist= 2.032303e-005 ; Snapping will NOT be attempted
New vertex
setcurpos [4.000000e-001 ,-6.928000e-001 ,2.650000e+001]
Existing Vertex id= 51
setcurpos [4.000000e-001 ,-6.928203e-001 ,2.650000e+001]
----------------------------------------------
Contact Analysis Results