大家都用的什么设备仿真CST,求推荐
Which hardware configuration can be recommended? (Faq #3)
(Last modified: 4/25/2012 )
EM simulations can be classified as high performance computing tasks. Therefore, the CPU, RAM, and graphic performance of workstations used for CST applications should meet high requirements. Likewise, a sufficient power supply and heat flow have to be ensured for the workstation. Thus, we strongly recommend to buy a complete package from a brandname manufacturer, e.g. DELL, HP, or IBM.
We strongly recommend that the chosen hardware meets the following requirements. For a workstation/server without special acceleration features (i.e., GPU Computing or MPI Computing) we recommend:
■The latest Intel Xeon processors (currently the Intel Xeon processors of the E5 series, “Sandy Bridge EP”)
■The fastest RAM memory modules (DDR3, RDIMM). The memory modules need to be arranged in multiples of four (4 modules, 8 modules, etc.) per processor socket for the Xeon E5 platform. Please note that the maximum memory bandwidth depends on the number of RAM modules as well as the type of the modules. The maximum memory bandwidth is currently 1600 MHz. A high memory bandwidth is essential to obtain the best possible performance for many of the CST solvers. Please ask your hardware vendor to provide you with a configuration which achieves this memory bandwidth.
■For a multiprocessor system we recommend at least 16-32 GB RAM per socket depending on the complexity of your application.
■100% OpenGL compatible graphics card. For the best performance of the 3D modeling and post processing interface we recommend a fast 3D graphics card (e.g. cards of the NVIDIA Quadro series).
If the usage of special acceleration features (GPU Computing/MPI Computing) offered by CST STUDIO SUITE is intended there are additional requirements the hardware should meet. Please refer to the GPU Computing Guide (http://updates.cst.com/downloads/GPU_Computing_Guide_2012.pdf) and the information found in the chapter "Simulation Acceleration" of the CST STUDIO SUITE help documents to learn more about those special requirements.
哈哈处理器,内存,硬盘读写速度快点,主板整好点
你现在用的是什么配置啊?
相关文章:
- cst仿真错误提示,请求帮助 (05-08)
- 关于偶极子天线仿真的问题 (05-08)
- 请问从CST天线仿真结果怎么看出这种天线的极化方式呢? (05-08)
- 哪位大哥用CST仿真过频率选择表面,小弟有问题请教 (05-08)
- CST MWS仿真螺旋天线同轴溃电提示waveguide for port number 1 is too short (05-08)
- CST MWS仿真问题 (05-08)