ADS的直流仿真出错,好像是license的问题。
05-08
我在参考《ADS射频电路设计》上的例子,做一个很简单的DC仿真,然后出错了,eetop.cn上也有这种情况,不过没找到有价值的解决方案。不知道你有没有遇到过,出错信息附在后面了。那个license,昨天安装ADS的时候已经提示安装成功了,不知道为啥还会出错。
Simulation Messages
Error detected by hpeesofsim during circuit set up `Sweep1'.
An appropriate license for linear features is not available. This
feature must be licensed before it can be used.
FlexLM error message:
Linear Simulator
The desired vendor daemon is down
Possible Causes:
1. lmgrd process is running, but not the agileesofd vendor daemon. The software was able to contact the license server (lmgrd), but the vendor daemon (agileesofd) did not respond.
2. agileesofd vendor daemon has crashed or has been terminated.
3. lmgrd process was shut down manually or via LMTools with -x lmdown option
4. On Windows platform, this could be caused by waking up from Sleep or Hibernation mode.
5. The logfile was unable to be removed.
Troubleshooting Tips:
1. Check the license server's debug log file and try lmreread.
2. Reboot your system to restart the license service.
3. Use LMTools to clear your previous setup first, then restart license setup wizard to re-configure your license.
4. Shut down the lmgrd process and check that lmgrd or agileesofd processes are no longer running. Restart the license server.
5. Stop lmgrd via kill pid (UNIX) withough -9 argument or stop the lmgrd process through the Windows Task Manager or Windows Service.
6. Close all processes that are reading the logfile.
License Requested: sim_linear
License path: C:\Program Files\Keysight\EEsof_License_Tools\license.lic
Status / Summary
hpeesofsim (*) 430.shp Dec 7 2014
(64-bit windows built: 12/07/14 09:11:55)
Copyright Keysight Technologies, 1989-2015.
NXP SiMKit (ver. 4.3 (4.3))
Model mos1101e Copyright NXP Semiconductors 2001, 2010.
Model mos3100 Copyright NXP Semiconductors 1998 - 2010.
这个把license和安装的软件放在一个文件夹里试一下,看是否有用
这个license之前就是放在ADS安装路径下的。
相关文章:
- 直流仿真问题 (05-08)
- 请教高手:如何将一LNA的SP模型转换为封装模型从而加直流偏置进行仿真? (05-08)
- 怎么做直流偏置 (05-08)
- ADS中设计低噪放怎么用微带加直流偏置啊 (05-08)
- 求教ADS2005A的直流仿真的问题(急) (05-08)
- 求助:ADS仿真直流工作点 (05-08)
射频专业培训教程推荐