请高手帮忙解决个仿真问题
05-08
[attachment=17341]在用HFSS仿真一器件,仿真过程中出现如上的错误报告,请高手帮个忙,看一下这是什么原因,谢谢! 图可能显示不出来,我把错误报告直接写在下面
HFSSDesign1:
[error] Double precision discrete solution, process solver6 : subprocess %3 failed to solve the problem due to lack of precision. The likely cause is that the frequency is too low. (2:13 下午 三月 16, 2009)
[info] Solution Setup 'Setup1', Sweep 'Sweep1': Interpolating sweep did not converge. (2:13 下午 三月 16, 2009)
[error] Simulation completed with execution error on server: Local Machine. (2:13 下午 三月 16, 2009)
HFSSDesign1:
[error] Double precision discrete solution, process solver6 : subprocess %3 failed to solve the problem due to lack of precision. The likely cause is that the frequency is too low. (2:13 下午 三月 16, 2009)
[info] Solution Setup 'Setup1', Sweep 'Sweep1': Interpolating sweep did not converge. (2:13 下午 三月 16, 2009)
[error] Simulation completed with execution error on server: Local Machine. (2:13 下午 三月 16, 2009)
Solution Frequency 值设的太低了。
我提高了Solution Frequency的 值,结果还是一样
将扫频的范围扩大试试
相关文章:
- 仿真求救 (05-08)
- 请问用HFSS怎么仿真螺旋天线? (05-08)
- 如何将protel99se 中的pcb模型到入到hfss或designer中进行仿真 (05-08)
- 请教用hfss仿真功分器怎么添加隔离电阻 (05-08)
- 请问从HFSS仿真后的文件怎样求出其等效LC (05-08)
- 射频EDA仿真软件介绍(包括算法,原理) (05-08)
射频专业培训教程推荐