为什么CST,HFSS基板材料磁导率增加后,仿真很慢?
求指点。
Changed the catergory.
The permeability (or relative permeability) is the measurement of the ability of a material to support the formation of a magnetic field within itself. If you increase the permeability, in my opinion, you modify the material's property (increase the Q factor) that it can store more energy from the applied magnetic field. Therefore, it should take longer time for the material to radiate the stored energy into free space.
About verification, you may establish a RF resonance model, linearly increase the permittivity and/or permeability and I expect the following:
1. Q factor is increased.
2. Resonance frequencies moves toward lower frequency range.
3. Bandwidth becomes narrower.
4. Slover takes longer time to meet the numerical noise level.
相关文章:
- cst材料库问题 (05-08)
- 如何在cst中设置材料二次电子发射系数? (05-08)
- 不同材料交界面的折射现象如何仿真? (05-08)
- 背景材料的设置 (05-08)
- 请问CST中能加入半导体材料吗? (05-08)
- 关于材料参数导入的问题 (05-08)