官方淘宝店 易迪拓培训 旧站入口
首页 > 仿真设计 > CST微波工作室 > CST MWS中如何查看天线的辐射效率

CST MWS中如何查看天线的辐射效率

05-08
CST中如何查看天线的辐射效率?请求各位朋友帮忙看一下,谢谢!

Add a farfield monitor at a specified frequency.

那个不是查看方向图和增益的吗?我是新手,请详细指教,谢谢!

补充一下哈,我说的是随着频率变化,天线辐射效率变化的曲线!

You may try "Template Based Postprocessing".
Define several farfield monitors during specified frequency range, open Template Based Postprocessing, click "0D Results", select "Farfield Results".
In "Farfield Results", select "broadband", then click "Set Frq/Time..." to set up the frequency/time sweep.
In "Evaluation Range", select either "3D", "Polar - const theta" or "polar - const phi"
In "Results Value", select "Rad. Efficiency" or "Tot. Efficiency".
Setup the rest properties then evaluate the results.
If you use "1D Results", you must select "3D" to plot the efficiency.

Thank you!

谢谢,受教

这也是我一直想问的问题,不错。

请问下小编用的是哪个版本的,如果是2011版的话又该如何设置呢。谢谢你

我现在的机器上已经没有2011了。

Template Based Postprocessing   这个东东的确很有用啊,可惜搞明白的有些晚

学习了!谢谢

Top