HFSS仿真出现这个错误,什么原因?
05-08
仿真有两个激励端口时出现了这些错误:什么原因啊?
[error] Adapting mesh, process mesh3d : Error while opening or writing the mesh files. (11:46 下午 三月 20, 2008)
[error] Simulation completed with execution error on server: Local Machine. (11:46 下午 三月 20, 2008)
[info] Parametric Analysis on ParametricSetup1 has been started. (11:46 下午 三月 20, 2008)
[info] A variation (AH='35mm' AL='27mm' BH='30.714mm' BL='27mm' d='0mm' feedlength='48.5mm' feedwidth='5mm' gndlength='65mm' gndwidth='65mm' l='4.5mm' rlength='15.05mm' slotwidth='1mm' subheight='1.575mm' u='5.95mm') has been requested (11:46 下午 三月 20, 2008)
[error] Recovering adaptive solution, process abc3d : Write failure in subprocess %3. Possible causes are: out of disk space, no file access privileges, or hardware and/or network problems. (11:48 下午 三月 20, 2008)
在别人的机器上跑可以阿?
发个模型上来大家瞧瞧
应该是软件问题
敢问小编这个问题解决了吗?
相关文章:
- 仿真求救 (05-08)
- 请问用HFSS怎么仿真螺旋天线? (05-08)
- 如何将protel99se 中的pcb模型到入到hfss或designer中进行仿真 (05-08)
- 请教用hfss仿真功分器怎么添加隔离电阻 (05-08)
- 请问从HFSS仿真后的文件怎样求出其等效LC (05-08)
- 射频EDA仿真软件介绍(包括算法,原理) (05-08)
射频专业培训教程推荐