ADS生成版图的问题
05-08
Generation of layout started from schematic representation:
1 design(s) processed
21 item(s) regenerated in layout
4 item(s) relocated in layout
0 item(s) unplaced in layout
0 trace design(s) created
Errors and Warnings (4 total):
In design S_PARA, instance C3 has been offset by (0, -100) because otherwise
components would have overlapped at (-0.7, 4.33).
In design S_PARA, instance P3 has been offset by (0, -200) because otherwise
components would have overlapped at (-0.7, 4.33).
In design S_PARA, instance C5 has been offset by (0, -300) because otherwise
components would have overlapped at (-0.7, 4.33).
In design S_PARA, instance C6 has been offset by (0, -400) because otherwise
components would have overlapped at (-0.7, 4.33).
大侠们,这是什么原因导致的
1 design(s) processed
21 item(s) regenerated in layout
4 item(s) relocated in layout
0 item(s) unplaced in layout
0 trace design(s) created
Errors and Warnings (4 total):
In design S_PARA, instance C3 has been offset by (0, -100) because otherwise
components would have overlapped at (-0.7, 4.33).
In design S_PARA, instance P3 has been offset by (0, -200) because otherwise
components would have overlapped at (-0.7, 4.33).
In design S_PARA, instance C5 has been offset by (0, -300) because otherwise
components would have overlapped at (-0.7, 4.33).
In design S_PARA, instance C6 has been offset by (0, -400) because otherwise
components would have overlapped at (-0.7, 4.33).
大侠们,这是什么原因导致的
看那上面的意思好像是说元器件重起来了。我没碰到过所以我也不清楚,上面的只是我猜的。
就是说在生成版图时这几个重叠在一起。这个对版图是没有问题的,你拖开就可以了
相关文章:
- 如何通过ads进行有源电路的版图仿真? (05-08)
- 版图+原理图协同仿真端口设置 (05-08)
- 请教在ADS的版图里如何画多边形? (05-08)
- 请教ADS版图仿真 (05-08)
- ADS版图优化遇到问题,请各位帮帮忙 (05-08)
- 请教在ADS版图里的两个微带线之间能加入电容吗? (05-08)
射频专业培训教程推荐