求助hfss仿真平板电容,网格生成失败。
05-08
在仿真平板电容时候,出现以下错误,导致网格生成失败。望各位高手指点一下
BEGIN_ERR
4 Two entities from different bodies are misaligned
91 119 1 1 Entity1, entity2, typeof1 typeof2
END_ERR
BEGIN_ERR
8 The Model Resolution Length specified for this object may be too large
118 0.000000 0.000131 0.000293 0.000000 0.000129 0.000098 0.000100 mm bid, vol, surfarea, effthick bef and after MRL units
END_ERR
BEGIN_ERR
10 Volume Mesh Generation Failed
1 1 #nextgen/ver6_stitching_flag failure_mode_enum
END_ERR
BEGIN_ERR
4 Two entities from different bodies are misaligned
91 119 1 1 Entity1, entity2, typeof1 typeof2
END_ERR
BEGIN_ERR
8 The Model Resolution Length specified for this object may be too large
118 0.000000 0.000131 0.000293 0.000000 0.000129 0.000098 0.000100 mm bid, vol, surfarea, effthick bef and after MRL units
END_ERR
BEGIN_ERR
10 Volume Mesh Generation Failed
1 1 #nextgen/ver6_stitching_flag failure_mode_enum
END_ERR
相关文章:
- ADS Momentum 仿真设计流程(英文)(05-08)
- 仿真软件官方网址(05-08)
- 软件中的耦合问题仿真(05-08)
- 请高手看看这几个错误,你们在仿真过程遇到没有啊,请指教谢谢!(05-08)
- 仿真时在30GHz, lumped port 问题(05-08)
- 仿真时出现的问题,请教大家!(05-08)
射频专业培训教程推荐