HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例
|
HFSS视频教程推荐： HFSS培训教程套装 | 两周学会HFSS | HFSS微波器件仿真分析实例 | HFSS雷达散射截面分析 HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例 |
HFSS online help > Viewing Analysis Results for Optimetrics Solutions
At any time during or after the Optimetrics solution process, you can see an overview of the computing resources or profile data that was used by HFSS as it solved each design variation. Optimetrics writes the variation information to the profile table before the solve. It then updates the entry with end data (end time, elapsed time, etc) once the solve variation is completed.
1. In the project tree, right-click the Optimetrics solution setup of interest, and then click View Analysis Result on the shortcut menu.
The Post Analysis Display dialog box appears.
2. Click the Profile tab.
3. Select the Optimetrics setup with the results you want to view from the pull-down list at the top of the dialog box.
4. Optionally, to examine more detailed profile data for a specific design variation, do the following:
a. Click a design variation in the table.
b. Click Solver Profile.
The Solutions dialog box appears with the profile data for the selected design variation.
The profile line for the matrix solver is in the following format:
Solver 123
where:
• 1 is the precision type: M (mixed) or D (double)
• 2 is the matrix data type: R (real) or C (complex)
• 3 is the symmetry type: S (symmetric), A (asymmetric), H (hermitian)
Viewing Solution Data for an Optimetrics Design Variation
|
||
Ansys HFSS，Ansoft HFSS online help，Version 15.0. |
HFSS视频教程 | HFSS教程专栏 | 射频工程师培训培训课程 : Viewing an Optimetrics Solution's Profile Data'>HFSSComments |