HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例
|
HFSS视频教程推荐： HFSS培训教程套装 | 两周学会HFSS | HFSS微波器件仿真分析实例 | HFSS雷达散射截面分析 HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例 |
HFSS online help > Viewing Analysis Results for Optimetrics Solutions
1. In the project tree, right-click the parametric setup for which you want to view the results calculated for the solution quantities, and then click View Analysis Result on the shortcut menu.
The Post Analysis Display dialog box appears.
2. Select the parametric setup with the results you want to view from the pull-down list at the top of the dialog box.
3. If it is not already selected, select Table as the view type.
The results for the selected solution quantities are listed in table format for each solved design variation. The variation column in the table lists the entries in order. Clicking the Vision header inverts the order. Clicking other headers sorts the entries by value, and clicking again inverts the order.
4. Optionally, select Show complete output name.
The complete name of the solution for which the results are being displayed will be listed in the column headings.
5. Optionally, click a design variation in the table, and then click Apply (at the far right side of the dialog box).
The design displayed in the 3D Modeler window is changed to represent the selected design variation.
Plotting Solution Quantity Results vs. a Swept Variable
|
||
Ansys HFSS，Ansoft HFSS online help，Version 15.0. |
HFSS视频教程 | HFSS教程专栏 | 射频工程师培训培训课程 : Viewing Results for Parametric Solution Quantities'>HFSSComments |