HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例
|
HFSS视频教程推荐： HFSS培训教程套装 | 两周学会HFSS | HFSS微波器件仿真分析实例 | HFSS雷达散射截面分析 HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例 |
HFSS online help > Setting Up an Optimization Analysis
Solving a parametric setup during an optimization analysis is useful when you want Optimetrics to solve every design variation specified in the parametric setup at each optimization iteration. A cost function goal could then depend on the value of the variable swept in the parametric setup.
To solve a parametric setup during an optimization analysis:
1. In the Setup Optimization dialog box, click the General tab.
2. In the Parametric Analysis pull-down list, click the parametric setup you want Optimetrics to solve during an optimization.
3. Select Solve the parametric sweep during optimization.
4. Optionally, you can adjust the sweep values to be used during the optimization.
a. Click on the Goal tab, click Setup Calculations to specify a calculation.
The Add/Edit Calculation dialog box is displayed.
b. Click the Calculation Range tab.
c. Click the Edit button for the sweep to be modified.
d. In the pop-up dialog box, select the sweep values to use.
e. Close the pup-up dialog box. Click Done to close the Add/Edit Calculation dialog.
|
||
Ansys HFSS，Ansoft HFSS online help，Version 15.0. |
HFSS视频教程 | HFSS教程专栏 | 射频工程师培训培训课程 : Solving a Parametric Setup During an Optimization'>HFSSComments |