- 1
- 2
- 3
- 4
Plotting Field Overlays
Setting Field Plot Defaults
Each new field plot uses the default plot settings specified in the Set Plot Defaults dialog box.
To modify the default plot settings:
1. If a plot folder has not been created, click Field Overlays in the project tree.
2. Click HFSS or
HFSS-IE>Fields>Set
Plot Defaults
.
The Set Plot Defaults dialog box appears.
3. Select the solution to plot from the Solution pull-down list.
4. Select the plot folder in which new plots will be stored from the Quantity type pull-down list. Choose one of the following options:
![[spacer]](1p.gif){kind=small}
New Folder |
Each new plot will be stored in a separate folder in the project tree. |
Automatic |
Each new plot will be stored in a folder determined by HFSS as the most appropriate based on the plotted field quantity. For example, all surface magnitude E plots will be stored in the same folder. |
An existing folder |
Select the existing folder in which you want to store new plots. |
Note |
Plots stored in the same folder will use the same color key. The Auto scale setting will be based on the maximum field solution value present in a plot. |
5. Under Intrinsic Variables, specify the frequency and phase angle at which the field quantity is evaluated.
6. Click OK.
Related Topics
Technical Notes: Specifying the Phase Angle
-
国内最全面的HFSS培训课程，包含7套视频教程和2本教材，资深专家讲解，视频操作演示，结合最新工程案例，让HFSS学习不再难...【详细介绍】
