HFSS中文教程 HFSS视频教程推荐: HFSS培训教程套装  |  两周学会HFSS  |  HFSS微波器件仿真分析实例  |  HFSS雷达散射截面分析 

HFSS天线设计  |  PCB天线设计和HFSS仿真分析实例  | HFSS-IE仿真器使用详解和天线设计实例

 HFSS online help > Tuning a Variable   

Applying a Tuned State to a Design

You can apply the variable values solved during a tuning analysis to the nominal design in one of the following three ways:

• When closing the Tune dialog box:

1. Click Close to exit the Tune dialog box.

The Apply Tuned Variation dialog box appears.

2. Click the design variation you want to apply, and then click OK.

The variable values from the solved design variation become the current variable values for the nominal design. If you have applied variant values, you should see the new values listed in the relevant Design or Project Properties lists of variables and values, and if the changes affect plots or physical features of a model, those changes should also be apparent.

• When saving a tuned state.

• When reverting to a tuned state.



HFSS教程     

Ansys HFSS,Ansoft HFSS online help,Version 15.0.

HFSS视频教程HFSS教程专栏射频工程师培训培训课程 : Applying a Tuned State to a Design'>HFSSComments