HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例
|
HFSS视频教程推荐： HFSS培训教程套装 | 两周学会HFSS | HFSS微波器件仿真分析实例 | HFSS雷达散射截面分析 HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例 |
HFSS online help > Specifying Output Variables >
The Output Varibles window can be accessed in several ways. To add an output variable:
• Click HFSS or HFSS-IE>Results>Output Variables.
• In the Project tree, right-click on Results and select Output Variables from the short-cut menu.
• In the Solution Setup dialog, select the Expression Cache tab, click the Add... button to display the Add to expression cache dialog, and click the Output Variables button.
• Click the Output Variables button the Reports dialog.
Existing variables appear in the list at the top of the window.
1. In the Output Variables section, enter a name for the new variable in the Name box.
2. To enter an expression, do one or both of the following:
a. Type part or all of the expression directly in the Expression area. Valid functions appear in blue. Invalid functions appear in red, which usually means that you need to provide quantities for a function.
b. Insert part or all of the expression using the options in the Calculation and Function sections.
3. Click Add to add the new variable to the list.
4. Repeat to add additional variables.
5. When you are finished adding output variables, click Done to close the Output Variables window.
Related Topics
Building an Output Variable Expression Using Existing Quantities
Viewing the Output Variable Convergence
|
||
Ansys HFSS，Ansoft HFSS online help，Version 15.0. |
HFSS视频教程 | HFSS教程专栏 | 射频工程师培训培训课程 : Adding a New Output Variable'>HFSSComments |