淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Script Guide >
Output Variable Script Commands

Output Variable Script Commands

Output variable commands should be executed by the "OutputVariable" module. To execute a command, you must first obtain the output variable module from oDesign, then use it to invoke the particular output variable command.

Set oModule = oDesign.GetModule("OutputVariable")

oModule.CommandName <args>

Legacy output variable commands such as the following were previously executed by the oModule object — these commands are still supported but they are now deprecated, and will produce a message-window warning.

Set oDesign = oProject.GetDesign ("DesignerDesign1")

Set oModule = oDesign.GetModule("OutputVariable")

The topics for this section include:

CreateOutputVariable

DeleteOutputVariable

DoesOutputVariableExist

EditOutputVariable

GetOutputVariables

GetOutputVariableValue

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com