• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Schematic Editor >
   Ports In Designer >
       Interface Ports >
           Renaming an Interface Port               

Renaming an Interface Port

Each interface port you place appears as a Port object under the selected design’s icon in the project tree. The name of the port is the name of the node or net to which it is connected. Node names of the form “net_n” are automatically generated during the wiring operation, but can be renamed. To rename an interface port, select it by clicking its schematic symbol or its icon in the project tree. Then click on the port name button in the Properties window to open the Interface Port Name dialog box:

Enter the desired name, then click OK. The property window reflects the new name. Note that the port number (pnum) does not change:

• If the port is placed so that it connects to an existing node, the node is renamed to the name of the port , even if the node was manually renamed. (You can also change a port name attached to a node by selecting the node and clicking on the node name in its property window. A Net Name dialog box similar to the one above opens for you to specify a new name. Changing the net name changes the names of any ports attached to that node.)

• If you name a port the same as an existing net, the two nodes are merged into a single node with that name. A dialog box appears for you to confirm the merge operation.

• If you delete an interface port, the node to which it was attached is renamed to a system-defined name (“net_n”).

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com