淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Schematic Editor >
   Miscellaneous Schematic Operations >
       Setting Up Hierarchical Schematics >
           Copying an Existing Subcircuit within a Design

Copying an Existing Subcircuit within a Design

To copy an existing subcircuit within a design:

1. Open the design that contains the subcircuit you want to copy.

2. Do either of the following:

• In the project tree, right-click the icon for the subcircuit, and then select Copy.

• In the design, select the subcircuit symbol, and then click Copy on the Draw menu.

3. Do either of the following:

• On the Edit menu, click Copy.

• On the keyboard, press CTRL+V.

Within the schematic window, the cursor is associated with an N-port symbol for subcircuit placement. To place the subcircuit, click at the desired location.

Hint

You can rotate the symbol for a subcircuit before placing it by repeatedly pressing R on your keyboard. Each press rotates the component 90º counterclockwise.

If Multiple Placement is turned on for components in Designer’s Schematic Options dialog box, you can place additional instances of the subcircuit by clicking at additional locations. To stop placing subcircuits during multiple placement, do either of the following:

• Press ENTER, the SPACEBAR, BACKSPACE, or ESC on your keyboard.

• Right-click, and then select Place and Finish, Finish, Cancel, or Back.

Note

To ensure electrical connectivity among schematic elements, the pins of placed subcircuit symbols snap to a 100-mil (2.54-millimeter) grid. This snapping cannot be turned off, and the spacing of the connectivity grid cannot be adjusted.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com