淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Working with Designer Projects >
   Setting Options via Configuration Files >
       Example Uses for Export Options Features >
           Example for Setting an Installation Default Value               


Example for Setting an Installation Default Value

The normal default for the Desktop/Settings/ProjectOptions/DiskLimitForAbort setting is 0 MB. If the administrator is concerned that running out of disk space might be a common problem, the administrator could set the installation default for the Desktop/Settings/ProjectOptions/DiskLimitForAbort setting to 1000 MB, for example. This limit would then apply to all users running on all hosts. The administrator could use the following command to change this setting for Designer 14.0:

UpdateRegistry -Set -ProductName Designer14.0 -RegistryKey _

Desktop/Settings/ProjectOptions/DiskLimitForAbort _

-RegistryValue 1000
-RegistryLevel install




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com