淘宝官方店 推荐课程 在线工具 联系方式 关于我们 | |
微波射频仿真设计 Ansoft Designer 中文培训教程 | HFSS视频培训教程套装 |
|
首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档 |
HFSS and Planar EM Simulators > Setting up a Full-Wave SPICE AnalysisTo determine a suitable frequency range for a solution that will be used for a Full-Wave SPICE analysis: 1. Click Setup Full-Wave Spice in the sweep setup dialog box. The Setup for Full-Wave Spice dialog box appears. 2. Type a value in the Signal Rise Time text box. This value represents the time scale that will characterize the rate of change of the input time signal to be applied in the circuit simulator. By default, this value is set to 1. 3. Type a value in the Time Steps Per Rise Time text box. By default, this value is set to 5. The time sampling increment for the entire
signal is calculated using where Dt is the time sampling increment. t is the signal rise time. Nt is the number of time steps per signal rise time. 4. Enter a value in the Number of Time Points text box. By default, this value is set to 500. Note that the input time signal duration is determined using N ´ Dt, where N is the number of time points. 5. Click Calculate. Designer determines the Maximum Frequency
using where Fmax is the maximum frequency. It determines the Frequency Step Size
using and determines the Number of Frequency Steps using N - 1. 6. Click Accept to transfer the new frequency sweep data to the frequency sweep fields in the sweep setup dialog box. Optionally, click Cancel to return to the sweep setup dialog box and maintain previously entered frequency sweep settings.
The topics for this section include: Guidelines for Calculating Frequencies for a Full-Wave SPICE Analysis
HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系:mweda@163.com |