淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

HFSS and Planar EM Simulators >
Using the Estimate Module >
Estimating Transmission Line Quantities >
Estimating Width

Estimating Width

Use this command to estimate the width of a microstrip or stripline from the characteristic impedance you specify. This command is not applicable for a CPW line.

To estimate the width:

1. Select the trace layer on which the microstrip line lies.

2. Click T-Line>Width.

Estimate parameters and results boxes appear in the right portion of the Estimate window.

3. Type the characteristic impedance, in ohms, of the microstrip line in the Impedance box.

4. Click Calculate to display the estimated width.

The line width corresponds to the specified impedance. The units for the width are the same as the current working units.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com