淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

HFSS and Planar EM Simulators >
Using the Estimate Module >
Estimating Matches Between Impedances

Estimating Matches Between Impedances

Use the Impedance Match menu to estimate matches between an input impedance and a load impedance. The following commands are available:

Quarter-Wave	Estimates the dimensions of a quarter-wave section to match a load impedance to an input impedance.
Tuning Stub	Estimates the location and the dimension of a tuning stub for matching an input impedance to a complex load impedance.

The Quarter-Wave transformer and the Tuning Stub commands offer two different ways of matching an input impedance to a load impedance. While quarter-wave transformers are more commonly used, tuning stubs may occupy less physical space. Tuning stubs can also be used to match a real input impedance to a complex load impedance, whereas quarter-wave transformers are used only with real input and load impedances

Note

The Impedance Match commands are only available for trace layers.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com