淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
Setting up a Parametric Analysis >
Specifying a Solution Setup for a Parametric Setup

Specifying a Solution Setup for a Parametric Setup

To specify the solution setup that Designer will analyze when it solves a parametric setup:

1. In the Setup Sweep Analysis dialog box, click the General tab.

2. Select the solution setup you want Designer to use when it solves the parametric setup.

Designer will solve the parametric setup using the solution setup you select. If you select more than one, results will be generated for all selected solution setups.

The topics for this section include:

Specifying the Solution Quantity to Evaluate

Setup Calculations for Optimetrics

Specifying a Solution Quantity Calculation Range

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com