 淘宝官方店 推荐课程 在线工具 联系方式 关于我们 |
|
|
微波射频仿真设计 |
|
| 淘宝官方店 推荐课程 在线工具 联系方式 关于我们 |
|
|
微波射频仿真设计 |
|
| 首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档 |
|
Optimetrics > Setting the Solution Quantity Calculation RangeThe calculation range of a solution quantity determines the intrinsic variable value at which the solution quantity will be extracted. For a statistical setup, the calculation range must be a single value. For a Driven Modal or Driven Terminal design, if you specified that the solution be extracted from the last adaptive solution, Optimetrics uses the adaptive frequency defined in the solution setup. If you specified that the solution quantity be extracted from a frequency sweep solution, Optimetrics will use the starting frequency in the sweep by default. 1. Under the Calculations tab of the Setup Statistical Analysis dialog box, click Edit Calc. Range. The Edit Calculation Range dialog box appears. 2. In the Variable pull-down list, click a variable. If you chose to solve a parametric setup during the statistical analysis, the variables swept in that parametric setup are available in the Variable pull-down list. If you sweep a variable in the parametric setup that is also a statistics variable, that variable will be excluded from the statistics analysis. Other examples of available variables include frequency, if you selected an S-parameter solution quantity; and phi or theta, if the solution quantity is a radiated field quantity. 3. Single Value is selected by default. In the Value text box, type the value of the variable at which the solution quantity will be extracted. 4. Click Update, and then click OK.
HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
|
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com |
|
Ansoft Designer / Ansys Designer 在线帮助文档：
