淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
   Setting up an Optimization Analysis >
       Adding a Cost Function >
           Setting a Goal Value

Setting a Goal Value

A goal is the value you want a solution quantity to reach during an optimization analysis. It can be a real value or a complex value. If the solution quantity is a complex calculation, the goal value must be complex. You can type the goal value in the Goal text box. Alternatively, you can use the Edit Goal/Value Weight dialog box to specify the goal value as a single value, a mathematical expression, or dependent on a variable such as frequency.

The topics for this section include:

Specify a single goal value

Specify an expression as the goal value

Specify a variable-dependent goal value

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com