淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
Setting up a Statistical Analysis >
Modifying the Starting Variable Value

Modifying the Starting Variable Value

A variable’s starting value is the first value that will be solved during the statistical analysis. Optimetrics automatically sets the starting value of a variable to be the current value set for the nominal design. You can modify this value for each statistical setup.

Warning

Variable values must be single real numbers, or expressions that evaluate to single real numbers. Complex numbers cannot be used as the values of variables in any optimetric analysis.

1. In the Setup Statistical Analysis dialog box, click the Variables tab.

All of the variables that were selected for the statistical analysis are listed.

2. Type a new value in the Starting Value text box for the value you want to override, and then press Enter.

The Override option is now selected. This indicates that the value you entered will be used for this statistical analysis; the current value set for the nominal model will be ignored.

• Alternatively, you can select the Override option first, and then type a new variable value in the Starting Value text box.

3. Optionally, click a new unit system in one of the Units text boxes.

To revert to the default starting value, clear the Override option.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com