淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
Nexxim Component Models >
Controlled Sources >
   Voltage-Controlled Voltage Source, Op Amp       

Voltage-Controlled Voltage Source, Op Amp

 

VCVS Op Amp Netlist Format

The format for a voltage-controlled voltage source ideal op amp is:

Exxxx out+ out- OPAMP in+ in- GAIN=val

out+ is the positive node and out- is the negative node of the voltage source. The entry OPAMP selects the E element op amp type. in+ and in- are the positive and negative nodes for the control voltage. GAIN is the element gain (default 1e12).

The VCVS OPAMP is an ideal op amp with a very high gain.

VCVS Op Amp Netlist Examples

E9 outplus outminus OPAMP ctrlplus ctrlminus

Eopamp 34 35 OPAMP 25 26 GAIN=5e12




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com