淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Component Models >
Slotline Elements >
Selecting None for the Initial Substrate

Selecting None for the Initial Substrate

For Nexxim designs that are created with the Schematic Editor in Designer, the initial selection of a global substrate type is made from the Choose Layout Technology dialog box that appears when you select Insert Nexxim Circuit Design from the Project menu.

However, no slotline substrates are avaiIable in the Choose Layout Technology dialog box.

If you wish to use an slotline substrate, you must create it as a custom substrate type.

In the Choose Layout Technology dialog box, click None. The design opens, but no substrate type will be applied to instances of distributed elements until you create a custom substrate type.

See Creating a Slotline Substrate for details.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com