淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Component Models >
Stripline Elements >
   Compensated TEE       

Compensated TEE

 

[spacer]

 

NOTE: There is no netlist form for this component. It is available for Planar EM simulation only.

n1, n2, and n3 are the names of the nodes attached to the tee.

 


Compensated TEE Instance Parameters

Parameter

Description

Unit

Default

W

Conductor width at ports 1 and 2

Meter

0.001

W3

Conductor width at port 3

None

0.001

D

Notch depth

Meter

0.001

ANG

Notch angle

Degree

45

Notes

1. This model is available for Planar EM simulation only.

2. The notch angle coincides with the center of the line on port 3.

3. The structure is de-embedded to the reference planes that coincide with the edges of W and W3, respectively, unless the notch angle or depth causes the edges of the notch to fall outside the rectangle transcribed by the physical dimensions W and W3. In that case, the reference planes are transferred to the outermost corners of the notch.

4. If a substrate is not defined for the component, the Layout stackup or Footprint stackup may be used.

 



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com