淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
Nexxim Component Models >
Inductors >
   Inductor with Q Factor       

Inductor with Q Factor

 

Netlist Syntax

The general syntax for an inductor with Q factor instance is:

Axxxx n1 n2 [L=val] [Q=val] [EXP=val] [TC1=val] [TC2=val]

[M=val] [DTEMP=val] COMPONENT=inductor_q

n1 is the positive node and n2 is the negative node of the inductor. The current is assumed to flow from n1 through the inductor to n2.

The parameter COMPONENT=inductor_q identifies the element as an inductor with Q factor.

 


Inductor with Q Factor Instance Parameters

Instance Parameter

Description

Unit

Default

DTEMP

Inductor and circuit temperature difference

°C

0.0

L

Inductance

Henry

10.0e-9

EXP

Q exponent

0 = constant Q

1 = constant R

Other = EXP

None

0.0

F

Frequency at which Q is specified

Hertz

1.0e9

M

Divisor to simulate multiple inductors in parallel

None

1.0

Q

Quality factor

None

300.0

TC1

Linear temperature coefficient

°K-1

0.0

TC2

Quadratic temperature coefficient

°K-2

0.0


 

Inductor Instance Netlist Example

Aindq2 1 2 L=5e-9 Q=325 TC1=2 COMPONENT=inductor_q




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com