淘宝官方店 推荐课程 在线工具 联系方式 关于我们 | |
微波射频仿真设计 Ansoft Designer 中文培训教程 | HFSS视频培训教程套装 |
|
首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档 |
Nexxim Simulator > Inductors, Coupled (K)
Coupled Inductors Netlist FormKxxxx Lyyyy Lzzzz [[K=]val] Lyyyy and Lzzzz are inductors defined elsewhere in the netlist. The K= entry specifies the coefficient of mutual coupling, default 0.99. K must be in the range {-1 £ K £ 1}. Coupled Inductors Netlist ExampleL10 1 2 L=1MH L22 3 4 L=3MH K23 L10 L22 K=0.95 Notes1. If the netlist specifies a coefficient of mutual inductance less than -1, the value will be changed internally to -1.0 (with a warning message). 2. If the netlist specifies a coefficient of mutual inductance equal to 0, the value will be changed internally to 1e-10 (with a warning message). 3. If the netlist specifies a coefficient of mutual inductance greater than +1, the value will be changed internally to +1.0 (with a warning message). 4. If the netlist specifies one mutual inductor joining inductors L1 and L2, and a second mutual inductor joining L2 and L3, the netlist must also have a third mutual inductor joining L1 and L3. If one of the mutual inductors is missing, the simulator will provide the missing one (with a warning message). However, the value of K for the supplied mutual inductor is probably not correct for the circuit. HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系:mweda@163.com |