淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
Nexxim Component Models >
Lumped Elements General >
   DC Block for Bias       

DC Block for Bias

 

[spacer]

DC Block Instance Netlist Syntax

The DC Block device is equivalent to a short circuit at AC, and to an open circuit at DC.

The syntax for a DC block device instance is:

Axxxx n1 n2 [C=val] COMPONENT=dc_block

n1 is the positive node and n2 is the negative node of the DC block. The current is assumed to flow from n1 through the capacitor to n2. The entry COMPONENT=dc_block is required to identify the element.

The capacitance C defaults to 100,000 Farad.

DC Block Device Netlist Example

Ablock1 3 4 C=500000




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com