淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
Nexxim Component Models >
Probes >
   AMI Probe       

AMI Probe

 

AMI Probe Netlist Format

Note 

The AMI probe is created via the AMI model import wizard. See IBIS AMI Model Support in the Nexxim topic.

The AMI Probe implements the user’s AMI receiver model in an Algorithmic Modeling Interface simulation. The netlist syntax is:

AAMIPROBExxxx positive negative COMPONENT=AMI_PROBE
+ LIBRARY='file-reference'
+ PARAMETERS_FILE='file-reference'

positive and negative are the nodes connected to the AMI probe. The AMI probe should connect to the same signal lines as the corresponding AMI source without any direct connection to ground. The entry COMPONENT=AMI_PROBE identifies the element. The LIBRARY entry gives the path and name of the the AMI model library file. The PARAMETERS_FILE entry gives the name of the file containing the model parameters to be used in the analysis.

AMI Probe Netlist Example

AAMIPROBE1 net_34 net_27 COMPONENT=AMI_PROBE
+ LIBRARY='my_AMI_lib'
+ PARAMETERS_FILE='my_parameters'




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com