淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Using GPUs with Nexxim Analyses

Using GPUs with Nexxim Analyses

Nexxim can take advantage of a Graphics Processing Unit (GPU) to accelerate simulation, eye rendering, or both. Nvidia^® GPUs with compute capability 2.0 are supported.

To enable Nexxim to use a GPU installed in your computer, set the global analysis option use_gpu=1 (see Analysis-Specific Options).

When enabled, Nexxim uses the GPU to acclerate the rendering of eye diagrams for Transient, QuickEye, and AMI analyses. The GPU also speeds up QuickEye and AMI simulations.

Setting use_gpu=1 also enables Designer to speed up the rendering of eye diagram reports in general.

Warning

GPU acceleration cannot be accessed by remote users. Setting use_gpu=1 takes effect only with direct logins.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com