淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Variable Sweep >
Running Variable Sweeps from the Netlist Editor >
To Run a Sweep with Any Analysis

To Run a Sweep with Any Analysis

1. Specify the sweep as part of simulation statement (.DC, .TRAN, .HB, or .LNA), using the syntax described in the next section.

2. Run the simulation:

a. On the Circuit menu, click Analyze with Nexxim. If the circuit is set up correctly, the analysis begins immediately and a red progress bar appears.

b. If the analysis is not successful, check the Message Window for an explanation, and then take corrective action.

3. Display results:

a. On the menu bar, click Circuit and then click Create Report. The Create Report dialog box appears.

b. When the Report dialog box appears, make the appropriate selections, click Add Trace, and then click Done.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com