淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Variable Sweep >
Running Variable Sweeps from the Schematic Editor >
Setting Up a Local Variable on a Component Parameter

Setting Up a Local Variable on a Component Parameter

All simulations allow a local variable to be swept. To create a local variable on a component for parameter sweep, perform the following steps:

1. Click on the component to bring up its Parameter window.

2. Click on the value of the parameter and enter the name of the local variable to be created. Press Return.

3. The Add Variable dialog box opens. The local variable name you entered in the Parameter window appears in the Name field. Enter a default value for the local parameter in the Value field. Click the Local Variable radio button. Click OK.

4. Repeat this procedure until all desired component parameters have been set up as variables.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com