淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
VerifEye and QuickEye Analyses >
Running VerifEye Analysis from the Schematic Editor

Running VerifEye Analysis from the Schematic Editor

To run VerifEye analysis, the design must include at least one Eye Source and a corresponding Eye Probe. Channel parameters including equalization are set up in the source and probe. Other parameters can be specified in the setup dialog. Topics in this section are:

Add an Eye Source for VerifEye

Add an Eye Probe for VerifEye

Add an External Step Response for VerifEye

Set Up the VerifEye Analysis

Run the VerifEye Analysis

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com