淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
VerifEye and QuickEye Analyses >
QuickEye and VerifEye Technical Notes >
QE and VE Crosstalk Analysis

QE and VE Crosstalk Analysis

For crosstalk analysis, the design incorporates multiple combinations of Eye Sources and Eye Probes. The typical crosstalk situation has one victim channel (the one whose integrity is being assessed) and one or more aggressor channels creating the crosstalk. Each channel has an Eye Source on the transmit end and an Eye Probe at the receive end; these two components point to each other via parameters. (A channel may have multiple Eye Probes, but only the probe at the receiver should be linked to the source.) To make the analysis meaningful, the design should use coupled transmission lines.

The basic idea of crosstalk analysis is to run the victim channel alone to obtain the victim’s eye diagram with no crosstalk. Then run both the victim and the aggressor channels, compute the victim’s eye diagram again, and compare the two eyes to assess the effect of the crosstalk.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com