淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
AMI Analysis >
Prototyping with MATLAB Files

Prototyping with MATLAB Files

Instead of C++ modules, Nexxim AMI analysis can simulate from library files containing MATLAB functions for the transmitter and receiver. The parameter files are the same for both C++ and MATLAB implementations.

The MATLAB files for the transmitter and receiver have the standard .m extension. Each file should contain the MATLAB code for the Init(), GetWave(), and Close() functions described in the AMI Analysis Technical Notes.

Other than the library file, the setups for the source, probe and analysis are the same for both MATLAB and C++ implementations.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com